2/3/2024 0 Comments Feline weathercatRe-insert the Logger, making sure to press down firmly to properly seat the pins.Make sure all 10 pins are still straight and none are bent from your over-achieving wiggling.You will still need to wiggle the Logger back and forth to induce it to release its grip. If you do use pliers, be careful, and only grip where indicated.You can use a pair of long nose pliers to assist if your grip strength gives out before the Logger pins do.Eventually, it will loosen up and come out.Grip it where indicated on the Logger and wiggle. Remove the ethernet cable from the Logger.Unplug the AC power cable from the rear of the console.You will then be able to easily remove the first battery.The easiest way to do this is to pull back on the second battery, relieving pressure on the first battery.Turn the console over and remove the battery cover.This will change the screen to display SERIAL BAUD RATE 19200.This will enter setup mode on the console and the screen will display RECEIVING FROM.On the Davis console press DONE and the minus button (-) at the same time.How to reset the Logger (in 20 easy steps) In order to clear the buffer you have to reset the Logger. The WeatherCat Log available under Tools will indicate the various weather data components are not ready. However, no data is being received by your Mac. When this happens, you will still see the status light on the Logger itself flashing green, indicating data is being sent from the Vantage console. Depending on how long the Logger buffer has been stuck, you may even see thousands of Comms Errors in the Cat. Sometimes, the buffer in the WeatherLinkIP™ data logger (hereinafter referred to as the Logger) gets "stuck." When this occurs, WeatherCat will start recording multiple, consecutive Comms Errors. WeatherCat V3.1.3 is available for immediate download or if you are running WeatherCat V3.0.0 or later, you can wait for the update notification within WeatherCat to auto update.This page refers to the original Davis WeatherLinkIP™ data logger (product number 6555), which has been discontinued and which is NOT the same thing as the currently marketed Davis WeatherLink Live wireless logger. You may be asked to install it via a dialog box (this will only happen once) – this video shows the process. Note that from version 3.1.3 onwards, and if running on macOS 12, WeatherCat requires Apple’s Python 3 to be installed on your system for some of its functionality. Fix a crash that could happen when initialising the camera.Fix for an issue where the background on basic gauges would always be white irrespective of the colour set in the preferences on macOS 11 or later.Fix a warning shown on first launch on macOS 12 that WeatherCat needs to be updated (this is a Python 2 deprecation notice – if running on macOS 12 or later we now use Python 3 – see note below).Removed Wunderground webcam functionality as Wunderground announced discontinuance of the webcam service – ).This is a bug fix/maintenance release – changes are as follows: We are pleased to announce the release of WeatherCat version 3.1.3. WeatherCat V3.2.0 is available for immediate download or if you are running WeatherCat V3.0.0 or later, you can wait for the update notification within WeatherCat to auto update. Update to German localisation courtesy of Reinhard. Fixed an issue with inconsistent AM/PM designators across the interface.ġ4. If all station data is deleted, we now also delete the rain and snow edit data (Preferences->Location/Colours->Delete Data).ġ3. Twitter – temperatures are now displayed to 1 decimal place, previously it was an integer.ġ2. Now built with Xcode 14, no change in earliest OS we can run on (10.9 or later).ġ1. Temperatures in all-time weather record emails are now reported to 1 decimal point, previously was 2.ġ0. Temperatures in annual weather record emails are now reported to 1 decimal point, previously was 2.ĩ. Minimum period for WeatherCloud is now 1 minute (down from 10).Ĩ. Notifications can be switched off and on from WeatherCat’s preferences (Advanced pane)ħ. Note that the alert text will be truncated by the notification system and you can turn off and change the style of the alerts via the Notifications System Preferences. Added initial macOS notifications support – startup, shutdown and custom alerts are sent to the notification system. Fixed a bug whereby numbers between -1 and 1 would always be displayed as 1 in the summary report to the log window as each sample is taken.Ħ. Admin emails are now defaulted to on for fresh installsĥ. Added a 3 second webcam capture period, previous minimum was 5 seconds.Ĥ. Custom text windows, Twitter, Banner generator, video preview and basic gauges windows will no longer appear in the Windows menu when they shouldn’t.ģ. We are pleased to announce the release of WeatherCat version 3.2.0.Ĭhanges over version 3.1.3 are as follows:ġ.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |